Bill Childs, Mankato, MN. 
E-Mail Bill Childs Vehicle Stats: Bill started with CCR plans to create his frame, although, a few personal changes were added from his own design ideas to complete the project. The front suspension with a 5" drop is from CCR and some Pete & Jake shocks to hold it all steady. Bill has a Chevy 350 standing by to be installed between the rails. At about 300 HP, he states it should be adequate for a 1,500Lb. T Bucket. The transmission will be a Chevy TH350 followed by a 10 bolt GM rear end holding 410 gears. Some QA-1coil over shocks will be holding the frame off of the 10 bolt rear end. Finishing up the rolling chassis are some fine skinny wire’s up front with disc brakes and some hefty M/T wide road trackers in the rear. Body is not decided on as of yet, although, plans are to have a tilt column, A/M gauges and plenty of leg room. Bill is designing and producing his own custom interior. Also, he will be building a wood dash as well as a custom wood pick up box to hold a 16 gallon fuel keg. He planes to do a bit of driving when it is all done.
| Hosted by The best ISP  |